Chameleon Labs 7602 MK II Mic Pre Amplifer EQ based on classic 1970’s Class A design

We are Eclectic Sounds / aka: eclsounds – a store front in Portland, Or. We are open 7 days a week from 11 – 5 PST (by appointment)

 This product is used in very good condition but sold as-is to no power supply and not being able to test it. 

24v power supply is not included.

The Model 7602 MKII is the sequel to our smash hit 7602 Microphone Preamplifier/Equalizer. The 7602 MKII new features include: selectable mic impedance, LED input metering, upgraded knob styles, and two different power options–all of this for the same price as the original unit.

The 7602 MKII ships with an inline power transformer (all regulation is done inside the unit).

The rackmountable CPS-1 can also still be used, but is no longer required.

The Model 7602 MKII Microphone Preamplifier/Equalizer is based on a classic and revered design utilizing pure Class ‘A’ circuitry. This unit is made with 100% discrete components, hand wound transformers and was fabricated to precisely match vintage counterparts manufactured in the early to mid 70’s. The Model 7602 MKII represents a dramatic breakthrough in delivering vintage audio performance at an affordable price.

Equalizer Section (Selectable 3 band design with a flexible filter section)

Filter – This is a high pass filter with 3db loss at 300Hz, 160Hz, 80Hz, and 50Hz with an 18db cut per octave slope.

Low Equalization – This section has a shelving slope with four frequency selections: 220Hz, 110Hz, 60Hz, and 35Hz. This equalizer affects the selected frequency and all others below it. The gain control provides 20db of boost or cut.

Mid Equalization – This section has a peaking characteristic with six frequency selections: 360Hz, 700Hz, 1.6k, 3.2k, 4.8k, and 7.2k. The gain control provides 20db of boost or cut.

High Equalization – This section has a shelving characteristic with five frequency selections: 16k, 12k, 7k, 4.9k and 3.4k. This section adjusts the selected frequency and all others above it. The gain control provides 20db of boost or cut.

Model 7602 MKII Features

• Fully balanced transformer mic and line inputs
• Balanced XLR output
• Hi-Z direct input for instruments on the front panel
• LED input metering *NEW
• Selectable mic impedance switch (300 or 1200 Ohms) *NEW
• 48VDC phantom power switch
• 180 degree phase reversal switch
• 20 position gold contact ELMA rotary gain switch for both Mic and Line sections
• Output level control functions as a fader when going straight to tape
• Carnhill mic and output transformer optional upgrade ($249 MSRP) *NEW
• One-year warranty

Electronics

By employing classic circuit design, polystyrene capacitors, a gold contact ELMA gain selector and custom wound transformers, Chameleon Labs ensures that the Model 7602 MKII will exhibit classic audio sound.

The Model 7602 MKII has a transformer balanced input with a range between 20dB and 80 dB of gain. The separate line input is transformer balanced and accepts input levels from -20 to +10dB.

Transformer Upgrade Option ($249 MSRP)

We offer factory installed Carnhill Mic and Output Transformers for this unit.

** NOTE: Transformer upgrade not available for original 7602 **

Power Options

The Model 7602 MKII features two different power options:

24VAC Adapter: Each Model 7602 MKII ships with a mid-line power supply, type-dependent on country of operation. This is not a traditional “wall-wart” but simply an outboard AC transformer. DC filtering and regulation is accomplished inside the 7602 MKII itself.

CPS-1 Dual Power Supply: For users who prefer a rack-mounted power option, the Model 7602 MKII may instead be powered by the CPS-1 Dual Power Supply. The CPS-1 is offered as an optional accessory and can provide power to two 7602 MKII units. Users will need to contact their preferred dealer to acquire the DC Cable needed to connect the CPS-1 and 7602 MKII.

Model 7602 MKII Specifications

Input impedance: Microphone 300 & 1,200 ohms
Line 10,000 ohms
D.I. 100,000 ohms

Sensitivity: Microphone -80dBm to -20 dBm in 5dB steps for 0 dBm output.
Line -20 dBm to +10 dBm in 5 dB steps for 0 dBm output.

Noise: Measured at 80 db of gain with 200 ohm input termination, without 20Hz to 20kHz to assist in filtering out noise.
-49dbu with final output stage at 50% EIN -129 dbu;
-46dbu with final output stage at unity EIN -126 dbu;
-56dbu without final output stage EIN -136 dbu.
Controls either “flat” or switched out.

Output: Balanced and floating to feed a 600 ohm load.
Maximum output +26 dBm into 600 ohms, or +20dBm into 150 ohms.

Output impedance: 600 ohms, balanced (source impedance 75 ohms).

Frequency Response: 11 Hz 77.65 kHz 3 dB.
Level variation is less than 0.2%.

Distortion: 1k Hz = 0.0245%

 

( Due to people taking advantage of eBay / Reverb return policies; wanting to “try out and/or pilfer parts”  we can no longer take returns on used gear unless it arrives damaged. Sorry for this inconvenience. We test and guarantee all gear to be 100% working unless stated otherwise )