Dunlop DCB-10 DC Brick Effect Pedal Multi-Power Supply

We are Eclectic Sounds / aka: eclsounds – a store front in Portland, Or. We are open 7 days a week from 11 – 5 PST (by appointment)

Used and working great. One owner home. Will come with 18V power supply and approx 5-7 cables to power your pedals.

This is not an isolated power supply, not for our germanium fuzz pedals or reverse polarity pedals.

The DC Brick is the most reliable and consistent way to power your effects board. Forget the collection of unsightly wall warts … the DC Brick will drive ten pedals or stomp boxes from the same source! More than a power supply, this box is a power conditioner as well. Unlike aging batteries, the Brick supplies predictable voltage at all times, keeping your effects consistent from show to show. Its FCLC (Foldback Current Limiting Circuit) provides ultimate protection against power shorts and overloads. Even at full load, you’ll enjoy the quiet and cool operation of a fully regulated power supply. But since battery-powered effects rarely exceed 30 milliamps each, you’re not likely to use anywhere near the Brick‘s capacity of 1000 milliamps output!

Power: Included AC power adapter can utilize a wide range of international wall power from 100 to 240 volts, at 47 to 63 Hz. Supplied with U.S. plug.

Controls: – Power Input from AC Adapter (Use only the included adapter!)

Seven 9V outputs can handle an average of 55 milliamps each, or a total of 375 milliamps in any configuration.
Three 18V outputs can handle an average of 208 milliamps each, or a total of 625 milliamps in any configuration.
All outputs may be used simultaneously for a total power output of up to 1000 milliamp

( Due to people taking advantage of eBay / Reverb return policies; wanting to “try out and/or pilfer parts”  we can no longer take returns on used gear unless it arrives damaged. Sorry for this inconvenience. We test and guarantee all gear to be 100% working unless stated otherwise )